Yak Skateboard/Longboard/Mountainboard

YAK Skateboard/Longboard Trucks, Wheels, Accessories This is a wholesale site only with a $400 minimum order requirement

Ten different longboard and short board decks available here

509-928-2128 • Fax: 509-891-8554 Email yakr@cet.com

Mountainboard spring truck with brake. $44.95 each.

------------------------------------------

Mountainboard, complete, as shown, unassembled, all hardware, 8-3/4" x 35",10-ply Canadian maple deck, 8" pneumatic tires. $82.95. Blank mountainboard deck also available separately @ $22.50

Mountainboard brake with truck. $39.95 each.

------------------------------------------------

Toeholder. 3.25" tall, 2.25" wide. Mounting hardware included. $4.75 pair.

Mountainboard risers. 3.75" long, 2.875" wide, 1.128" tall. Mounting hardware not included. $4.75 pair.

9-1/4" rubber-covered hard binding for mountainboard $4.95 each.

Soft binding for mountainboard. $4.95 each.

Mountainboard leash (not shown) $5.24 each.

-------------------------------------

Skateboard/longboard/mountainboard trucks and wheels

5" inside. 7-1/2 overall truck color selection:

Brushed aluminum on

•burgundy, •blue, •green.

•all gold

•all green

•all red

•all baby blue.

All $5.65 each

5" inside. 7-1/2 overall. Polished aluminum. $5.95 each

Yak Noir 180 and 150. All steel. Compare to Randal. All black.

180mm $8.25. 150mm $7.25.

5" inside. 7-1/2 overall. Red gull hanger, Black base $5.95 each

6-1/4" inside. 9" overall. Longboard truck. Blue anodized hanger & polished base. $6.85 each

9-5/8" Hunky Dory above compared to 9" original longboard truck below. $7.45

6-1/4" inside. 9" overall. Longboard gull truck. Red anodized hanger & polished base. $6.85 each

2-truck bushing set. Orange/soft. Red/Med. Yellow/hard. $3.00 per set.

8-1/2" inside. 15-1/4" overall. Mountainboard truck. 3/8" diameter axle does not fit 608 bearings. Fits 10mm id 5 spoke wheel. Polished aluminum. $11.25 each.

Pneumatic wheels to fit these trucks available below.

Mounting hardware: Phillips machine screws (8) with matching nylon locking nuts. 1" for 7-ply boards, 1-1/2" for 9-ply boards. $1.40 ea.

Cold-resistant GRIP TAPE

Black grit: Roll (shown) 10"x20 yards $39.95

33" x 9" $2.00 each;

47" x 10" $3.65 each;

Clear grit: 33" x 9" $2.25 each;

47" x 10" $3.95 each

New! 120mm x 50mm rubber on nylon w/ABEC5 bearings installed. Lightweight 13-1/2 oz. Very strong.

$7.95 each

New! 63mm x 55mm Old School $2.65 each.

Universal skate tool $2.95 each

Skateboard/Longboard Wheels

Check out all the LABEDA skateboard additions!

56 x 42 x 95 Mighty Whitey $6.25 4-pack

54mm x 36mm x 85a Slightly Whitey $5.95 4-pack

American made

56mm x 37mm x 90a

Code 3

$2.65 each

56mm x 97a x 34mm LABEDA Lager skateboard wheels - Natural color Blem with print

$5.25 for 4

Brilliant White

AMERICAN MADE first quality (volcanix) 50mm, 51mm, 52mm, 53mm, 54mm, and 55mm Diameter x 34mm x 98a - WHITE

All sizes available - $7.45 for 4

NEW!

Blackstone Ranger - all black 4-pack

56mmx42mmx95a - $6.35

52mmx38mmx95a - $5.95

50mm x38mm 51mm x 38mm, -52mm x 38mm, 53mm x 38mm, -54mm x 38mm, and 55mm x 38mm LABEDA skateboard wheels - Yellow

$6.95 for 4 - 1st quality

$4.65 for 4 - Color blem

70mm x 45mm x 78a Rounded shoulders. Lighter, harder, faster.

YAK Cojones

$2.15 each

YAK Flash. 70mm x 45mm x 78a. Flush inside, rounded outside shoulders. American made. Exceptionally fine wheel. $4.05 each

53mm x 36mm x 88a first quality Ruby Booby

$5.15 for 4

65mm x 40mm x 78a Kryptonics Classic K blue. Flush inside, rounded outside shoulders. Harder, faster.

$3.85 each

80mm x 45mm x 78a Kryptonics Classic clear w/race core. Flush inside, rounded outside shoulders.

Blue or clear $5.95 each

51mm x 30mm blue

$4.15 for 4

76mm x 45mm x 74a Kryptonics Classic. Flush inside, rounded outside shoulders.

Red or Blue $5.15 each

Big Red. 70mm x 45mm x 78a American-made first quality. Flush inside, rounded outside shoulders. Great wheel, great value. $3.85 each

70mm x 45mm x 78a Kryptonics Route 70 Clear. Flush inside, rounded outside shoulders. Blue or clear. $4.55 each

65mm x 45mm x 74a Power Paw Power Grip White. Centered hub, rounded shoulders.

$3.75 each

47mm x 24mm x 88a, in either black or white, $2.05 each.

75mm x 45mm rubber on aluminum w/ABEC5 bearings. Very grippy, highest level of control. $5.55 each.

110mm x 55mm rubber on nylon. Versatile on or off-road, great value. $4.05 each
110mm x 55mm rubber on nylon. Box set of four, including risers and all hardware (no bearings).
$20.95 per kit

70mm x 45mm Rubber on nylon with ABEC5 bearings. Very grippy, lightweight. $4.85 each

113mm x 64mm off-road rubber on nylon boxed set of four, including all risers and hardware (no bearings). $24.95 per kit. Also available in singles w/o bearings for $5.75 each

Slick

113mm x 64mm Big Slick rubber on aluminum w/2 ABEC5 bearings $12.95 each; boxed set of four including risers and hardware. $59.95 set

113mm x 64mm all-terrain rubber on aluminum w/2 ABEC5 bearings $12.95 each; boxed set of four including risers and hardware $59.95

5 spoke

200x50-4ply (7-3/8" tall) pneumatic w/tube on split nylon rim w/10mm bearings. 50 p.s.i. Fits mountainboard truck above. $11.25 each

Electric/Gas Scooter pneumatic wheel with axle and bearings fits most electric and gas scooters. 9"x3.5"-4ply, 50 p.s.i. $22.95 ea. More photos here

5 spoke

2.80/2.50-4 ply (8-1/2" tall) pneumatic w/tube on split nylon rim w/10mm bearings. 50 p.s.i. Fits mountainboard truck above. $12.95 each

8" shown

Pneumatic, inner tube, strong, lightweight polycarbonate hub, 608zz bearings, 60 p.s.i. This hub is 1/4" wider than standard inline wheels.

6" x 1-1/4" = $10.95

8" x 1-1/4" = $12.65

Tubes & tires available separately

Truck riser pad sets

1/4" to 3/8" wedge style shown $3.65 pair

Truck bushing set

Flat 1/8" - $1.50 pair

12-1/2" x 2-1/4" Pneumatic with inner tube and two bearings on lightweight polycarbonate rim. 1/2" axle, 2" hub width, 5/8" axle. Does not fit any truck on this page. $16.95 each